Showing posts with label Holden Commodore. Show all posts
Showing posts with label Holden Commodore. Show all posts

Wednesday, December 15, 2010

Holden’s E3 GTS Transforms into the 2012 Vauxhall VXR8 in Britain


Based on Holden’s most recent E3 series GTS model, the 2012 Vauxhall VXR8 will hit UK dealers next March, featuring several improvements over the previous model, which was built on the lower-spec ClubSport R8. Priced at £49,500 (VAT included), the new model is still considered a bargain in the country, considering that there’s a 6.2-liter V8 powerhouse under the bonnet.

The VXR8 undercuts the competition, such as the Mercedes E63 AMG, by between £13k and £29k, and even performance saloons from the class below, like the BMW M3 and Mercedes C63 AMG, but truth be said, it was always a little rough around the edges. Some consider that a perk, others a drawback. Nevertheless, the VXR8 was mildly revised for the 2012 model year, featuring a redesigned grille, LED daytime running lights and tail lamps, new wing vents and rear spoiler.

Inside, there’s an updated instrument cluster and full leather trim is standard. Other amenities include HSV Performance Seats and an Enhanced Driver Interface (EDI), which is a fancy name for a smarter onboard computer. EDI can record such data as G-forces, engine parameters and lap times, which can be later analyzed by owners using special software provided with the car.

In order to deliver performance that’s worth recording, the VXR8 comes with a fourth generation GM-sourced LS3 engine, delivering 431 ponies and 550 Nm (407 lb-ft) of torque. Power is sent to the rear wheels, either through a six-speed manual gearbox or an automatic transmission. A limited slip differential comes as standard.

The 0-60 mph (0-96 km/h) sprint takes just 4.9 seconds, while top speed is electronically limited to 155 mph (250 km/h).

To improve handling, engineers fitted the VXR8 for the first time with electronically controlled dampers. The system is called Magnetic Ride Control and it’s based on technology borrowed from the Corvette ZR1.

The VXR8 can be ordered in the UK through six dealers at the moment, but it will be available in a total of 34 locations later on.

By Csaba Daradics


_______________________________GALLERY_______________________________


Monday, November 22, 2010

New Rumors of the Pontiac G8 Returning to North America as a Chevrolet


The demise of the Pontiac brand in 2009 also brought about the death of the G8, the Americanized derivative of the Australian-built Holden Commodore SS. It was a sad day for Pontiac and Holden fans alike, the loss of the G8 export contract costing Holden millions of dollars and putting the future of its Elizabeth, South Australia plant - and the brand itself - in jeopardy.

When the Holden-derived Chevy Caprice Police Car was revealed for the North American market twelve months ago, rumors of a reborn G8 in the form of a Chevrolet were rife. Now, Aussie motoring website Drive is reporting that U.S. exports of the Holden Commodore SS are "imminent", with a launch expected before the end of the current model's lifespan.

At the LA Auto Show, Al Oppenheiser, a senior engineer at General Motors and the chief engineer on the Camaro project, told Drive that negotiations were underway to sell the Commodore in North America as a Chevrolet:

"Although we have made no official announcement as yet, we are definitely looking at doing something with Holden for the retail market. What we are looking at is bridging a gap in the performance sedan market that was vacated by the Pontiac G8. With no Pontiac, the obvious performance brand is Chevrolet."

An unnamed source at GM has even gone so far as to suggest that the export deal has already been finalized and approved. As the LHD development work is already done, the biggest hurdle facing Holden's relaunch of North American exports is the high Australian dollar.

Jonathan Rose, a spokesman for Holden, is less optimistic: "At this point in time our focus is on exporting the Caprice to North America as a law enforcement vehicle ... beyond that we don't have anything to add right now."

The unnamed Chevrolet, if it does become a reality, will mostly likely be based on the short wheelbase Zeta platform, not the long wheelbase one like the Chevy Caprice Police Car.

By Tristan Hankins

*Opening photos: South African Chevrolet Lumina

Source: Drive


__________________2011 HOLDEN COMMODORE SERIES II________________


Wednesday, November 10, 2010

LupiniPower's Chevrolet SportUte is a wild one; Packs 535HP from Supercharged V8


The Holden Commodore Ute may not have been given the chance for a career in the States as the G8 ST sport truck after the demise of Pontiac, but GM's modern-day El-Camino from Down-Under continues to be offered in markets outside Australia including South Africa were it is sold as the Chevy Ute SS.

LupiniPower, a local tuner from South Africa, has taken upon itself to introduce a hotted-up version sporting a 6.0-liter supercharged V8 with 535-hp and a massive 590 lb-ft (799 Nm) of torque. That's an increase of 173-hp and 200 lb-ft over the stock Ute with the naturally aspirated V8 engine.

Thanks to the added power, LupiniPower's SportUte completes the 0 to 60 mph (96km/h) sprint in 4.4 seconds instead of 6.0 seconds, while 0-100 mph (160km/h) goes by in 9.9 seconds, close to 4 seconds faster than the standard Ute.

Furthermore, the SuperUte reaches 125mph (201 km/h) in 15.5 seconds or over five seconds quicker than stock, boasts a quarter-mile time of 12.7 seconds at 113mph (182 km/h) and runs the standing kilometre in 22.8 seconds at 150mph (241 km/h), while top speed is up 25mph to 175 mph (282 km/h).

The South African tuner also improved the Chevrolet SportUte's stopping power with bigger race-specification front disc brakes and callipers, as well as the suspension setup. Optionally, buyers can add a full Bilstein suspension and a sporty limited-slip differential.

Finally, the supercharged Ute rides on new 20-inch alloy wheels wrapped around Bridgestone Potenza RE050 ultra-high performance tires.

The LupiniPower Chevrolet SuperUte can be had as complete new vehicle in South Africa for R639,900, equal to around US$94,000 / €67,400 / GBP58200 at today's rates.


_______________________________GALLERY_______________________________


Monday, October 18, 2010

Walkinshaw Performance Series II Commodore eats Ferraris for Breakfast


For the Australian car buff, Tom Walkinshaw needs no introduction. Here is the man who founded HSV and was responsible for the epic VL Commodore based HSV SS Group A in late '80s. Though no longer working for Holden, 'Walky' continues to turn out some of the most powerful and ballsiest vehicles Australia has ever seen through the performance company named after him.

At the Australian International Motor Show in Sydney, Walkinshaw Performance took the wraps off its latest model: the WP Series II Supercar. The Holden Commodore Series II SS derived super saloon is fitted with an Edelbrock WP 230 supercharger, boosting power to 617-horsepower (460 kw) and torque to 780 Nm (575 lb ft).

To reign in this beast, six piston brake rotors have been added along with a upgraded and recalibrated suspension package co-developed with Bilstein. The final touch is a unique audio system upgrade by Rockford Fosgate.

Walkinshaw Performance CEO Craig Wilson is extremely satisfied with the Series II Supercar:

"We're celebrating the release of the WP Series II Supercar by producing just 23 examples, finished in Panorama Silver, the same colour which adorned the original 'Walky' when it debuted at the Sydney Motor show 23 years ago". he said.

The whole package, including the AU$47,790 (US$46,930) manual Commodore SS base car, will start from AU$99,990 (US$98,810). This means the Walkinshaw modifications alone cost around AU$52,200 (US$51,880), including parts and labor.

By Tristan Hankins


_______________________________GALLERY_______________________________


Thursday, October 14, 2010

Holden Statesman HQ Fans [All five of us] Rejoice; First Ever Scale Model Released by Trax


I'm pretty sure most of you outside Australia are wondering a) what the heck a Statesman HQ is and b) why should you care that there's a die-cast model. Well, let me try to provide answers for these two questions:

A) The Statesman HQ was a luxury long-wheelbase model for the masses produced by GM's Holden from 1971 through 1974, and B) Apparently, most readers need not care but for the other four viewers I was referring to in the title, as far as I know, this is the first time that a scale model of the specific car has been built. For more history on the Statesman and details on the scale model, hit the jump.

Now, if you ask why the fixation with the HQ, that's because the original Statesman de Ville is the first car I recall my father owning. I assume every petrol head will have a similar memory [and obsession...] from their childhood.

Memories aside, the first-ever Statesman was based on Holden's HQ series of 1971 boasting more a dramatic look with a unique twin-headlamp fascia and subtle tail fins as well as a longer wheelbase.

However, it was never referred to as a Holden as GM marketed it as a separate marque even adding exclusive Cadillac-esque badges. The same goes for the HQ's successors, the HJ, HX, HZ and WB Statesmans, all of which were heavily based on the first model. The Commodore-based Statesmans from 1990 and up until September when GM's Australian subsidiary ditched the name altogether, were marketed as Holdens.

Powertrain options in the day included 202 c.i. (3.3-liter) and 253 c.i. (4.2-liter) six-cylinder and 308 c.i. (5.0-liter) and 350 c.i. (5.7-liter) V8 engines with the oh-so glorious three-speed Trimatic and 400 Turbohydramatic automatic transmissions delivering ponies to the rear wheels.

Interestingly, the Statesman HQ was also offered as the Chevrolet Constantia in South Africa (Chevrolet 350 in other markets) and even as the Isuzu Statesman De Ville in Japan.

As far as the scale model is concerned, it is made by Trax which offers two 1:43 variants in the Opal Series, one finished in glacier white with a black vinyl roof and black interior, the other in a nutmeg metallic shade with a saddle vinyl roof and matching interior. Trax said it will produce 2,000 examples of each model, with pricing set at AUD$59,95 a piece. And yes, my order has already been placed...

Link: Trax


_______________________________GALLERY_______________________________